Corrosión a alta temperatura de los recubrimientos metálicos NiCr y NiCrBSiFe depositados mediante proyección térmica
DOI:
https://doi.org/10.15665/rp.v13i1.357Keywords:
Corrosión, alta temperatura, rociado térmico, óxidos, recubrimientosAbstract
Se evaluó el comportamiento de la velocidad de corrosión de los recubrimientos NiCr y NiCrBSiFe depositados
mediante proyección térmica sobre láminas de acero hot rolled, sometidos a temperaturas de 400, 450, 500 y
550°C, durante 12, 24, 32 y 48 horas, la evaluación fue realizada a partir de la técnica de pérdida de peso. Se
evidenció que los dos recubrimientos proyectados térmicamente forman una capa que protege el material del
ambiente corrosivo que se obtiene al calentar el aire a altas temperaturas, aunque las dos aleaciones presenten
dicha propiedad anticorrosiva se determinó que el comportamiento de la velocidad de corrosión de las probetas
recubiertas con NiCrBSiFe fue mejor que el recubrimiento NiCr, pues el boro y silicio que contiene la aleación
actúan como inhibidores de la corrosión.
References
J. Maryulanda, A. Zapata, E. Izasa, “Protección contra
la corrosión por medio del rociado térmico”, Scientia et Technica.,
, 237 – 242, 2007.
B. Posada, D. Gamboa, (2007) “Protección Contra la
Corrosión en Sales Fundidas de un Acero por Rociado
Térmico con una Aleación Níquel Cromo en el Rango de
Temperatura de 500 c a 650”. Tesis de pregrado, Universidad
Tecnológica de Pereira.
E. Lugscheider, H. Eschnauer, U. Muller, T. Weber,
“Thermal spray technology”, Powder Metallurgy International;
, 33-39, 1991.
H. Ni, X. Liu, X. Chang, W. Hou, W. Liu, J. Wang,
“High performance amorphous steel coating prepared by
HVOF thermo spraying”, Journal of Alloys and compounds.
163 – 167. 2009.
S. Matthews, B. James, M. Hyland, “High temperature
erosion – oxidation of Cr3C2 – NiCr thermal spray
coatings under simulated turbines conditions”. Corrosion
Science. 70, 203 -211. 2013.
N. Birks. Introduction to high temperature oxidation of
metals, U.K, Edward Arnold Eds. 1983.
S. Matthews, B. James, M. Hyland. “The role of microstructure
in high temperature oxidation mechanism of
Cr3C2 . Ni-Cr composite coatings”, Corrosion Science, 51,
-1180, 2009.
P. Berthod. “Influence of chromium carbides on the
high temperature oxidation behaviour and on chromium
diffusion in nickel – base alloys”, Oxidation of Metals, 69,
– 96, 2007.
P. Berrhod, P. Lemoine, L. Aranda, “Study of the behaviour
in oxidation of high temperature of Ni-Cr and Fe
base alloys containing very high fractions of carbides”,
Materials Science, 595, 871 – 880, 2008.
F. Gómez, D. Alcaraz, D, Manual básico de corrosión
para ingenieros, España, Editorial Universidad de Murcia,
, pp. p 25-28.
J. Tristancho, F. Almerya, J. CHACÓN, “Estudio de
la corrosión por sales fundidas en el recubrimiento NiCr-
FeNbMoTiAl depositado por plasma spray”, Scientia et Technica;
, 379 – 383, 2010.
S. Matthews, B. James, M. Hyland, M. “The role of
microstructure of high velocity erosion of Cr3C2 – NiCr
thermal spray coatings: Part 1 – As-spray coatings”. Surface
& Coatings Technology. 203. 1086 – 1093. 2009.
J. Tristancho, J.Chacón., D. Peña, C. Gaona. J. Gonzalez,
A. Martinez, F. Almeraya. “Hot corrosion behavior
of NiCrFeNbMoTiAl coating in molten salts at 700°C by
electrochemical techniques”, International Journal of Electrochemical
Science; 16, 432 – 441, 2011.
G-.Beason, T. Mckenchnie, F. Zimmerman, (1995). Advances
in Thermal Spray Science and Technology. Proc. En
th National Thermal Spray Conference. ASM International
Materials Park. Ohio, USA.
J. Tristancho, (2011), “caracterización por sales fundidas
de los recubrimientos metálicos NiCrFeNbMoTiAl,
NiCrAlY, mediante técnicas electroquímicas”, Tesis Doctoral
Centro de Investigación en Materiales Avanzados CIMAV
S.C.
J.R Davis. Handbook of thermal spray technology,
ASM International, 2004, pp 43.
http://www.castolin.com/product
J.R Davis. Handbook of thermal spray technology,
ASM International, 2004, pp 50.
F. Michael J. Ashby. R. David, H. JONES. H. Materiales
para Ingeniería l: Introducción a las propiedades, las
aplicaciones y al diseño, España, Editorial Reverté, 2008.
R. Tosta, E. Inzunza K. Bautista, “Boro Como Inhibidor
Dela Oxidación Por Aire de Ánodos de Carbón En Celdas De
Reducción Electrolíticas”. Disponible en: internet:< http://
www.laccei.org/LACCEI2007-Mexico/Papers%20PDF/
EM039_Tosta.pdf>. [Fecha de consulta: Junio del 2014].
Downloads
Issue
Section
License
The authors to publish in this journal agree to the following conditions:
- The authors transfer the copyright and give the the journal first publication right of the work registered with Creative Commons Attribution License, which allows third parties to use the published work on the condition of always mentioning the authorship and first publication in this journal.
- The authors may perform other independent and additional contractual arrangements for the non-exclusive distribution of the version of the article published in this issue (E.g., Inclusion in an institutional repository or publication in a book), it must be indicated clearly that the work was first published in this journal.
- It allows and encourages the authors to publish their work online (eg institutional or personal pages) before and during the review and publication process. It can lead to productive exchanges and greater and faster dissemination of the published work (see The Effect of Open Access)
Instructions to fill out Certificate of Originality and Copyright Assignment
- Click here and get the forms of Certificate of Originality and Copyright Assignment .
- In each field to fill out, click and complete the corresponding information.
- Once the fields are filled out, at the end of the form copy your scanned signature or digital signature. Please adjust the size of the signature on the form.
- Finally, you can save them as pdf files and send them through the OJS platform as an attachment.
