Evaluación de la corrosión de un acero Aisi Sae 1020 en mezclas de gasolina-bioetanol del 5, 10, 15, 20 y 100% por medio de técnicas gravimétricas y electroquímicas
DOI:
https://doi.org/10.15665/rp.v10i2.233Keywords:
Bioetanol-Gasolina, Acero al carbono AISI 1020, EIS, Velocidad de corrosiónAbstract
En la búsqueda de nuevos y mejores combustibles de fuente renovable, el bioetanol surge como principal alternativa;
esté además de económico, contribuye en gran manera con la disminución de los gases que ocasionan el
efecto invernadero. El presente estudio tuvo como objetivo caracterizar el comportamiento electroquímico de
un acero AISI 1020 en contacto con mezclas bioetanol-gasolina, tomando como base para las pruebas estáticas
diferentes concentraciones (E5, E10, E15, E20 y E100) y tiempos (0, 7, 14, 21 y 28 días), a una temperatura de 24°C
aproximadamente. Las pruebas que se realizaron fueron: pérdida de peso mediante el ensayo de gravimetría y
pruebas electroquímicas (Tafel y EIS), mediante las cuales se pudo determinar la velocidad de corrosión del acero
en exposición a las diferentes mezclas.
Se observó que la velocidad de corrosión se encuentra influenciada por una capa porosa e inestable que se forma
como producto del efecto corrosivo sobre el acero; el comportamiento analizado de las pruebas de gravimetría
coincidió con los resultados obtenidos de las pruebas electroquímicas.
References
SEDO. (2009) etanaol.com.es [Internet] www.thebioflame.
com. Disponible desde: <http://etanol.com.es/index.
php/2009/03/10/los-ingenios-en-colombia-apuestanpor-
el-etanol/ http://>
BIODISOL. (2009) ¿Cuáles son las ventajas y las
desventajas de usar etanol en lugar de gasolina? Biocombustibles,
bioetanol. Disponible desde:
biodisol.com/biocombustibles/cuales-son-las-ventajasy-
las-desventajas-de-usar-etanol-en-lugar-de-gasolina-onafta-
biocombustibles-bioetanol/> [Acceso Enero 2010].
García, J., y García, J. Biocarburantes Líquidos: Biodiesel
y Bioetanol. Fundación para el conocimiento Madrid.
CEIM. p 405-416. 2006.
Salomón, R. Etanol, combustible alternativo. Cubasolar
[on line] Disponible desde: <http://www.cubasolar.cu/
biblioteca/energia/Energia29/HTML/articulo07.htm>
[Acceso Enero 2010].
Souza, J.P., Mattos, O.R., Sathler, L., and Takenouti, H.
(1987) Impedance measurements of corroding mild steel
in an automotive fuel ethanol with and without inhibitor
in a two and three electrode cell. Corrosion Science [on line],
(27) , p.1351-1364.
Goñi, A., Berlanga, C., Fernández, J. (2008) Corrosión
bajo tensión de un acero al carbono en mezclas de Bioetanol
y Gasolina. Disponible desde: <http://www.gef.es/
Congresos/25/PDF/4-12.pdf> [Acceso enero 2010].
Díaz-Ballote, L., López-Sansores, J., Maldonado-López,
L., Garfias-Mesias, L. (2008) Corrosion behavior of aluminum
exposed to a biodiesel. Disponible en:
elsevier.com/retrieve/pii/S1388248108004980>
[Acceso febrero de 2010].
Jafari, H., Idris, M., Ourdjini, A., Rahimi, H., Ghobadian,
B. (2009) Effect of ethanol as gasoline additive on
vehicle fuel delivery system corrosion, Materials and Corrosion.
Disponible en: <http://onlinelibrary.wiley.com/
doi/10.1002/maco.200905459/a
American Society for Testing and Materials, Anual
Book ASTM Standars 2004. ASTM G31-72. Standard Practice
for Laboratory Immersion Corrosion Testing of Metals.
K. Xiao. (2008) Corrosion products and formation mechanism
during initial stage of atmospheric corrosion of
carbon steel. Journal of Iron and Steel Research, International.
, p.42-48.
American Society for Testing and Materials, Anual
Book ASTM Standars 2010. ASTM G3-89. Standar Practice
for Conventions Applicable to Electrochemical Measurements
in Corrosion Testing.
Macdonald, J., Barsoukov, E. (2005) Impedance Spectroscopy
Theory, Experiment, and Applications. Second
Edition.
Cottis, R., Turgoose, S. Electrochemical Impedance
and Noise B.C Syrett, Series Editor.
Downloads
Issue
Section
License
The authors to publish in this journal agree to the following conditions:
- The authors transfer the copyright and give the the journal first publication right of the work registered with Creative Commons Attribution License, which allows third parties to use the published work on the condition of always mentioning the authorship and first publication in this journal.
- The authors may perform other independent and additional contractual arrangements for the non-exclusive distribution of the version of the article published in this issue (E.g., Inclusion in an institutional repository or publication in a book), it must be indicated clearly that the work was first published in this journal.
- It allows and encourages the authors to publish their work online (eg institutional or personal pages) before and during the review and publication process. It can lead to productive exchanges and greater and faster dissemination of the published work (see The Effect of Open Access)
Instructions to fill out Certificate of Originality and Copyright Assignment
- Click here and get the forms of Certificate of Originality and Copyright Assignment .
- In each field to fill out, click and complete the corresponding information.
- Once the fields are filled out, at the end of the form copy your scanned signature or digital signature. Please adjust the size of the signature on the form.
- Finally, you can save them as pdf files and send them through the OJS platform as an attachment.
