Metodología para la selección de motor en los procesos de extrusión.

Authors

DOI:

https://doi.org/10.15665/rp.v11i1.18

Keywords:

Metodología, Selección de motores, Fenómenos de transporte, Extrusión, Arcilla

Abstract

El trabajo actual presenta la metodología implementada para determinar la potencia requerida en motores para el proceso de extrusión de arcilla, la fuerza requerida para mover la arcilla dentro de la extrusora se establece al solucionar las ecuaciones diferenciales parciales que describen el fenómeno de transporte del proceso, las cuales deben ser reducidas desde su forma generalizada para poder obtener una solución analítica, el criterio utilizado para reducir las ecuaciones fue de significancia, el modelo fue comparado con una extrusora real y se determinó con los valores del motor que el error porcentual fue de 10.67%.

References

Bird. R. B., Fenómenos de transporte. Reverté, S. A., Barcelona, Expaña. 1992.

Shames Irving. Mecánica de fluidos. Tercera edición . Edit Mc Graw Hill. Santa fe de Bogotá, Colombia 1995.

Norton R. Machine Design. Edit Prentice Hall, Inc. USA 1996.

Welti-Chanes J. et al. Transport phenomena in food engineering: basic concepts and advances. Journal of Food Engineering 2005.

Bouzakis. K.D. et al. Experimental and FEM-supported investigation of wet ceramic clay extrusion for the determination of stress distributions on the applied tool´s surfaces. Journal of the European Ceramic Society 2008.

Tregger, N. et al. Influence of clays on the rheology of cements pastes. Cement and concrete research 2010.

Teh. E. et al. Difference in the rheology and surface chemistry of caolin clay slurries: the source of the variations. Chemical Engineering Science 2009.

Pusch R. Rheology of an artificial smectiticclay. Applied Clay Science 2010.

Frank Hândle. Extrusion in Ceramics. Springer Berlin Heidelberg, New York 2007.

Downloads

Published

2013-06-30

Issue

Vol. 11 No. 1 (2013)

Section

Articles

License

The authors to publish in this journal agree to the following conditions:

  1. The authors transfer the copyright and give the the journal first publication right of the work registered with Creative Commons Attribution License, which allows third parties to use the published work on the condition of always mentioning the authorship and first publication in this journal.
  2. The authors may perform other independent and additional contractual arrangements for the non-exclusive distribution of the version of the article published in this issue (E.g., Inclusion in an institutional repository or publication in a book), it must be indicated clearly that the work was first published in this journal.
  3. It allows and encourages the authors to publish their work online (eg institutional or personal pages) before and during the review and publication process. It can lead to productive exchanges and greater and faster dissemination of the published work (see The Effect of Open Access)

Instructions to fill out Certificate of Originality and Copyright Assignment

  1. Click here and get the forms of Certificate of Originality and Copyright Assignment  .
  2. In each field to fill out, click and complete the corresponding information.
  1. Once the fields are filled out, at the end of the form copy your scanned signature or digital signature. Please adjust the size of the signature on the form.
  2. Finally, you can save them as pdf files and send them through the OJS platform as an attachment.