Desarrollo de un Modelo Predictivo para la Calidad Superficial en un Proceso de Torneado sobre Aceros de Alta Resistencia
DOI:
https://doi.org/10.15665/rp.v12i1.151Keywords:
Calidad Superficial, Parámetros de Corte, Torneado, Análisis de Varianza (ANOVA), Metodología de Superficie de Respuesta (RSM).Abstract
La calidad superficial es uno de los indicadores de desempeño que tiene efecto sobre la aceptación o rechazo de
un producto terminado. Un producto terminado que no cumpla con el acabado superficial requerido por el cliente
es garantía de la generación de costos en el proceso de corte de metales manifestándose a través de grandes
cantidades de desperdicio de material, re-trabajo de piezas, tiempos extras, etc.
El articulo presenta un estudio sobre la influencia de los parámetros de corte en la calidad superficial en el proceso
de torneado cilíndrico de aceros. El trabajo experimental se ha desarrollado controlando el proceso de mecanizado
y estableciendo valores fijos para los parámetros de Velocidad, Avance y Profundidad de corte. Se utiliza una
técnica estadística basada en el análisis de varianza (ANOVA) y la Metodología de la Superficie de Respuesta para
establecer el grado de dependencia del acabado final con los parámetros de corte y obtener un modelo que permite
que la rugosidad superficial pueda predecirse mediante la combinación optima de los factores de estudio,
logrando así que las especificaciones dimensionales proporcionales en el diseño de las piezas puedan cumplirse.
References
BENARDOS, P.G., VOSNIAKOS, G.C., (2003) Predicting
surface roughness in machining: a review. International
Journal of Machine Tools & Manufacture, pp. 833 – 844
Boothroyd G., Knight W.A. Fundamentals of Machining
and Machine Tools, 2nd ed. Marcel Dekker, 1989.
Abouelatta, O, Madl, J. Surface Roughness prediction
based on cutting parameters and tool vibrations in turning
operations. Journal of Materials Processing Technology
(2001)269-277.
Davim, J. A note on the determination of optimal cutting
conditions for surface finish obtained in turning using
design of experiments. Journal of materials processing technology
(2001) 305-308
Ghanij.A, Choudhuryi A, Hassanh H. Application of Taguchi
method in the optimization of end milling parameters.
Journal of Materials Processing Technology 145 (2004) 84–92.
Correa M., et al. Factores que afectan el acabado superficial
en los procesos de mecanizado: Técnicas de análisis
y modelos. XXV Jornadas de Automática, 2004.
Vivancos J, Ortiz J.A, Costa L. Luis C.J. Determining factors
in the study of the surface roughness in the high-speed
milling of hardened mould steel. 8th International Research/
Expert Conference “Trends in the Development of
Machinery and Associated Technology”, TMT 2004, 15-18.
Vivancos J, Luis C.J, Costa L, Ortiz J.A. Optimal machining
parameters selection in high speed milling of hardened
steels for injection moulds. Journal of Materiales
Processing Technology 155-156 (2004) 1505-1512
Vivancos J, Luis C.J, Ortiz J.A, Gonzalez H.A. Analysis
of factors affecting the high speed side milling of hardened
die steels. Journal of Materials Processing Technology,
v 162163, 15 May 2005, 696-701.
[ISO4287 1998], Norma UNE-EN ISO 4287: 1998. Especificación
geométrica de productos (GPS), Calidad superficial:
Método del perfil. Términos, definiciones y parámetros del estado
superficial. Ed. AENOR 1999
[ISO4288 1998] Norma ISO 4288: 1996. Geometrical Product
Specification (GPS)-Surface texture: Profile method-Rules
and procedures for the assessment of surface texture. Ed. ISO
Standards, 1996
[ISO 8785 1998] Standard ISO 8785: 1998. Geometrical
Product Specification (GPS)-Surface imperfections-Terms, definitions
and parameters. Ed. ISO Standards,1998
Mongomery, D.C. Diseño y Análisis de Experimentos.
Limusa Wiley, Mexico, 2003.
Morera Steve. (2011) blogspot “Rugosidad, definición
y características” Disponible desde
blogspot.com/2011/07/rugosidad.html > [Acceso 16 de junio de 2013]
Briceo Mónica .(2011) blogspot. Ingeniería Electromecánica.
Rugosidad superficial. Disponible desde
monibriceo.blogspot.com/2011/07/rugosidad-superficial.
html> [acceso 20 de junio de 2013]
Vallina Manuel (2013) blogspot. Mecanizado Básico.
Variables del mecanizado. Disponible desde < http://manuelvallina.
blogspot.com/2013_11_01_archive.html > [acceso
de noviembre de 2013]
Downloads
Issue
Section
License
The authors to publish in this journal agree to the following conditions:
- The authors transfer the copyright and give the the journal first publication right of the work registered with Creative Commons Attribution License, which allows third parties to use the published work on the condition of always mentioning the authorship and first publication in this journal.
- The authors may perform other independent and additional contractual arrangements for the non-exclusive distribution of the version of the article published in this issue (E.g., Inclusion in an institutional repository or publication in a book), it must be indicated clearly that the work was first published in this journal.
- It allows and encourages the authors to publish their work online (eg institutional or personal pages) before and during the review and publication process. It can lead to productive exchanges and greater and faster dissemination of the published work (see The Effect of Open Access)
Instructions to fill out Certificate of Originality and Copyright Assignment
- Click here and get the forms of Certificate of Originality and Copyright Assignment .
- In each field to fill out, click and complete the corresponding information.
- Once the fields are filled out, at the end of the form copy your scanned signature or digital signature. Please adjust the size of the signature on the form.
- Finally, you can save them as pdf files and send them through the OJS platform as an attachment.
