Control de un brazo robótico usando el hardware kinect® de microsoft
DOI:
https://doi.org/10.15665/rp.v11i2.43Keywords:
Detección de movimiento, Control de Posición, Lego Mindstorm®, Cirugía Robótica, Detección de Articulaciones.Abstract
Los Joysticks y las interfaces hápticas han sido por excelencia los mecanismos más utilizados para controlar un
brazo robótico manipulador. Sin embargo, en campos específicos como los de la cirugía robótica, es deseable que
la interfaz sea de fácil uso, e intuitiva para el cirujano, tal que mejore sustancialmente las capacidades del mismo.
En este artículo se presentan una estrategia para el control de los movimientos de un brazo robótico con dos
grados de libertad utilizando como referencia dos movimientos de una mano. Para la utilizó la construcción del
brazo robótico se utiliza la plataforma de Lego MindStorm NXT. Para la detección de las articulaciones se utilizó
la la librería de detección de articulaciones del SDK de Microsoft Kinect®. La implementación de un controlador
para el robot, garantizó que la posición capturada de la mano sea la posición que presenta el brazo robótico. Por
último, se validó el comportamiento del sistema mostrando el seguimiento del brazo robótico a la posición deseada
obteniendo un bajo error cuadrático para el seguimiento de los dos ángulos requeridos.
References
Pugin, F., Bucher, P., Morel P., History of robotic surgery: From AESOP and Zeus to da Vinci. J. of Visceral Surgery, 148, e3-e8, 2011.
Surgery Enabled by Da Vinci. (2012). [Internet], Disponible desde: <http://www.davincisurgery.com/davincisurgery/>[
Acceso 20 de noviembre 2012].
Kalan S., Chauhan S., Coelho RF. et al., History of Robotic Surgery, J.of Refractive Surgery,4(3),141-147, 2010.
La cirugía laparoscópica asistida por robot. (2012)
[Internet], Disponible desde: http://www.marly.com.co/
serv_cirugia_robotica.html>. [Acceso 20 de noviembre 2012].
Luo R., Perng Y. W., Advances of mechatronics and
robotics, IEEE Ind. Elect. Mag., 27-34, 2011.
Congreso Nacional de Mecatrónica, VIII. 2009. México,
(2009). Control de un Robot Antropomórfico por Medio de
una Interfaz con Sensores Articulares, Hernández R., Reyes F., Vargas A., et al.
Los robots aprenden el lenguaje de la cirugía. (2012)
[Internet], Disponible desde: http://www.uciencia.uma.es/
Noticias/Tecnologia/Los-robots-aprenden-el-lenguaje-dela-
cirugia>. [Acceso 20 de noviembre 2012].
Proceeding of the ACM/IEEE International Conference
on Human-Robot Interaction (HRI), 6th. Suiza, (2011).
Humanoid Robot Control Using Depth Camera, Suay H.
Position Location and Navigation Symposium (PLANS)
IEEE/ION. USA. (2012). Study on the Use of Microsoft Kinect for Robotics Applications. El-Iaithy R., Huang J., Yeh M.
Lego MindStorm. (2012) [Internet], Disponible desde:
<http://mindstorms.lego.com>. [Acceso 20 de noviembre 2012].
Robot Arm. (2012) [Internet], Disponible desde:
www.nxtprograms.com/robot_arm/steps.html. >. [Acceso
de noviembre 2012].
Zang Z., Microsoft Kinect Sensor and Its Effect, IEEE
Magazine MultiMedia, 19(2), 4 – 10, 2012.
Webb J., Ashley J., Beginning Kinect Programming with the Microsoft Kinect SDK, Apress, New York, 2012.
Downloads
Issue
Section
License
The authors to publish in this journal agree to the following conditions:
- The authors transfer the copyright and give the the journal first publication right of the work registered with Creative Commons Attribution License, which allows third parties to use the published work on the condition of always mentioning the authorship and first publication in this journal.
- The authors may perform other independent and additional contractual arrangements for the non-exclusive distribution of the version of the article published in this issue (E.g., Inclusion in an institutional repository or publication in a book), it must be indicated clearly that the work was first published in this journal.
- It allows and encourages the authors to publish their work online (eg institutional or personal pages) before and during the review and publication process. It can lead to productive exchanges and greater and faster dissemination of the published work (see The Effect of Open Access)
Instructions to fill out Certificate of Originality and Copyright Assignment
- Click here and get the forms of Certificate of Originality and Copyright Assignment .
- In each field to fill out, click and complete the corresponding information.
- Once the fields are filled out, at the end of the form copy your scanned signature or digital signature. Please adjust the size of the signature on the form.
- Finally, you can save them as pdf files and send them through the OJS platform as an attachment.
