El análisis de fiabilidad humana en la mejora de procesos
DOI:
https://doi.org/10.15665/rp.v11i2.40Keywords:
Fiabilidad Humana, Error Humano, Comportamiento Humano, Mejora Continua, Gestión por Procesos, Análisis Probabilístico de Riesgos.Abstract
El mejoramiento de los procesos se considera con frecuencia como un aspecto técnico. Sin embargo, esta tarea
exige una perspectiva más amplia que permita a los ingenieros tener una mejor comprensión del significado
del aspecto humano y su contribución en la ocurrencia de fallos. Es por ello que se requiere emplear enfoques
cognitivos conjuntamente con los enfoques tradicionales, para evaluar mejor el comportamiento humano en su
interacción con los procesos. El análisis probabilístico de riesgos, aplicado a los sistemas industriales, demuestra
que el error humano es una parte importante del riesgo total. El presente trabajo tiene como objetivo mostrar la
aplicación del Análisis de la Fiabilidad Humana (AFH) en los Proyectos de Mejoramiento, para evitar fallos y
accidentes. También se muestra una breve discusión de los métodos y técnicas aplicados en un estudio de caso.
References
Elsayes A. Elsayed (1999). Reliability Engineering. Reading, Mass: Addison – Wesley, 1996. Second Edition. Reading, Mass: Addison – Wesley, 1999. 224 P.
Sebastián, M. (2009).Fallo humano: la quiebra de un
paradigma. Revista Apuntes de Psicología. 2009, Vol. 27,
número 1, págs. 21-5.ISSN 0213-3334.
Duro, A. (2009). Modulación del trabajo: estrategias de
adaptación del trabajador para regular las demandas de
tarea y persona. Psicothema, 21 (1), 105-111.
Villa y Pons, (2006). Modelo y procedimientos para el
Control de Gestión en busca de la Calidad en Instituciones
de Educación Superior. Congreso Internacional Universidad
Publicación de trabajos presentados en evento CD.
Bermúdez, et.al. (2008). “Aplicación de un procedimiento para la Gestión del Proceso de Investigación en un Departamento Docente”. Congreso Internacional De
Gestión Tecnológica e Innovación. Agosto 14 y 15 / 2008.
Bogotá. Colombia.
Pons Murguía, Ramón (2013). Clase magistral de Fiabilidad de Procesos. Especialización en Gestión de la Calidad. Universidad del Atlántico, Barranquilla, Colombia.
Marzo de 2013.
Kirwan, B. (1994). A guide to practical human reliability
assessment. London: Taylor & Francis. Maluf, D.
A., Gawdiak, Y. O., y Bell, D.G. (2008). On space exploration and human error a paper on reliability and safety. Disponible en http://citeseerx.ist.psu.edu/viewdoc/
summary?doi=?doi= 10.1.1.111.3314.
Rea, R., y Sandoval, s. (2000, mayo-junio). Análisis de
riesgos en la industria química. Boletín IIE-Méjico, 24, 110-
Disponible en http://www.iie.org.mx/calidad2000/
aplica.pdf
Creus, A. (2001). Fiabilidad y seguridad. Su aplicación
en procesos industriales. Barcelona: Ed. Marcombo.
Johnson, C. (2003). Failure in safety-critical systems:
A handbook of incident and accident reporting. Glasgow,
Scotland: Glasgow University Press.
Maluf, D. A., Gawdiak, Y. O., y Bell, D.G. (2008). On
space exploration and human error a paper on reliability
and safety. Disponible en http://citeseerx.ist.psu.edu/
viewdoc/summary?doi=?doi= 10.1.1.111.3314.
Ruiz – Moreno, J., Trujillo; H., 2012. Modelos para la
evaluación del error humano en estudios de fiabilidad de
sistemas. Revista Anales de Psicología, 2012, vol. 28, no. 3
(octubre), 963-977.
Armendola L., Depool T., [2005]. “Modelo de Confiabilidad Humana en la Gestión de Activos”. VII Congreso de Confiabilidad, Asociación Española de la Calidad, Madrid. España.
Cantú, H (2011). Desarrollo de una cultura de calidad.
México D.F.
Downloads
Issue
Section
License
The authors to publish in this journal agree to the following conditions:
- The authors transfer the copyright and give the the journal first publication right of the work registered with Creative Commons Attribution License, which allows third parties to use the published work on the condition of always mentioning the authorship and first publication in this journal.
- The authors may perform other independent and additional contractual arrangements for the non-exclusive distribution of the version of the article published in this issue (E.g., Inclusion in an institutional repository or publication in a book), it must be indicated clearly that the work was first published in this journal.
- It allows and encourages the authors to publish their work online (eg institutional or personal pages) before and during the review and publication process. It can lead to productive exchanges and greater and faster dissemination of the published work (see The Effect of Open Access)
Instructions to fill out Certificate of Originality and Copyright Assignment
- Click here and get the forms of Certificate of Originality and Copyright Assignment .
- In each field to fill out, click and complete the corresponding information.
- Once the fields are filled out, at the end of the form copy your scanned signature or digital signature. Please adjust the size of the signature on the form.
- Finally, you can save them as pdf files and send them through the OJS platform as an attachment.
