Evaluación de la biosorción con bagazo de palma africana para la eliminación de Pb (II) en solución
DOI:
https://doi.org/10.15665/rp.v13i1.360Keywords:
Adsorbente, Plomo, Residuo, Remoción, Tratamiento químicoAbstract
Se propone la adsorción de Pb (II) usando bagazo de palma tratado químicamente con ácido cítrico, se elige este
material por ser un desecho agroindustrial ampliamente disponible en la región Caribe colombiana. Los experimentos
fueron llevados a cabo en sistema batch en solución acuosa de plomo a una concentración de 100 ppm. La
determinación de la concentración de metal al final del proceso se midió por absorción atómica. La caracterización
de los materiales adsorbentes usados se hizo por FTIR encontrando que los grupos hidroxilos y carboxílicos
son los principales responsables de la capacidad de adsorción. Además, fue encontrado que el pH es el factor de
mayor incidencia en el proceso, siendo el de 6 el valor óptimo. Por otra parte, se encontró que el Pb (II) presenta
una sorción rápida durante los primeros 10 minutos, además el modelo de Elovich fue el de mejor ajuste. La capacidad
máxima de adsorción según la isoterma de Langmuir fue de 162 y 451 mg/g para el bagazo sin modificar
y modificado respectivamente, estableciendo que la modificación fue altamente eficiente.
References
J. Emsley, Nature’s Building Blocks. 1era edición. Estados
Unidos: Oxford University Press, 2001.
J. Wright, Environmental Chemistry. 1era edición. Estados
unidos: Editorial New York, 2003.
K. Krishnan, K. Sreejalekshmi, R. Baiju, “Nickel(II) adsorption
onto biomass based activated carbon obtained
from sugarcane bagasse pith”, Bioresource Technology, 102,
–10247, 2011.
N. Cuizano, A. Navarro, “Biosorción de metales pesados
por algas marinas: posible solución a la contaminación
a bajas concentraciones”, An. Química, 2, 120-125, 2008.
I. Acosta, J. Cárdenas, V. Martínez, “El uso de diferentes
biomasas para la eliminación de metales pesados en sitios
contaminados”, Ide@s CONCYTEG, 7(85), 911-922, 2012.
S. Kalyani, P. Srinivasa, A. Krishnaiah, “Removal of
nickel (II) from aqueous solutions using marine macroalgae
as the sorbing biomass”, Chemosphere, 57(9), 1225–
, 2004.
J. Febrianto, N. Indraswati, S. Ismadji, Y. Ju, N. Kosasih,
J. Sunarso, “Sequestering of Cu(II) from aqueous
solution using cassava peel (Manihot esculenta)”, Journal of
Hazardous Materials, 180, 366–374, 2010.
I. Castro, G. Manjarrez, L. Utria, “Bioacumulación de
Cd en ostras de la bahía de Cartagena”, Revista ingenierías
Universidad de Medellín, 7(13), 11-20, 2008.
J. Ordoñez, R. Moreno, Estudio del aprovechamiento de
residuos orgánicos de cultivos de flores (tallos de rosas) como
biosorbente de cadmio para el tratamiento de aguas residuales.
[Tesis de pregrado]. Universidad politécnica salesiana,
Ecuador, 2013.
J. Muñoz, Biosorción de Plomo (II) por cáscara de naranja
“citrus sinensis” pretratada. [Tesis de pregrado]. Universidad
Nacional mayor de San Marcos, Perú, 2007.
K. Vallejo, Estudio de la adsorción de Cd (II) y Pb (II),
usando como adsorbente la ulva lactuca (lechuga de mar), [Tesis
de pregrado]. Universidad de Oriente, Venezuela, 2008.
A. Maldonado, C. Luque, D. Urquizo, “Biosorción de
plomo de aguas contaminadas utilizando pennisetum clan-destinum hochst (kikuyo)”, Rev. LatinAm. Metal. Mat., S4,
-57, 2012.
E. Atehortua, C. Gartner, “Estudios preliminares de la
biomasa seca de eichhornia crassipes como adsorbente de
plomo y cromo en aguas”, Revista colombiana de materiales,
, 81-92, 2013.
K.K. Krishnani, X. Meng, L. Dupont, “Metal ions binding
onto lignocellulosic biosorbent”, J. Environ. Sci. Heal.
A, 44, 688–699, 2009.
K.K. Krishnani, X. Meng, C. Christodoulatos, V.M.
Boddu, “Biosorption mechanism of nine different heavy
metals onto biomatrix from rice husk”, Journal of Hazardous
Materials, 153, 1222–1234, 2008.
B. Zhu, T. Fan, D. Zhang, “Adsorption of copper ions
from aqueous solution by citric acid modified soybean
straw”, Journal of Hazardous Materials, 153, 300–308, 2008.
K.Y. Foo, B.H. Hameed, “Preparation, characterization
and evaluation of adsorptive properties of orange peel
based activated carbon via microwave induced K2CO3 activation”,
Bioresource Technology. 102 (20), 9814-9817, 2011.
W.S. Wan Ngah, M.A.K.M. Hanafiah, “Removal of heavy
metal ions from wastewater by chemically modified
plant wastes as adsorbents: A review”, Bioresource Technology,
, 3935–3948, 2008.
K. Anoop, K.G. Sreejalekshmi, R.S. Baiju, “Nickel (II)
adsorption onto biomass based activated carbon obtained
from sugarcane bagasse pith”, Bioresource Technology, 102,
–10247, 2011.
L.V. Alves, L.F. Gil, “Adsorption of Cu(II), Cd(II) and
Pb(II) from aqueous single metal solutions by succinylated
twice-mercerized sugarcane bagasse functionalized with
triethylenetetramine”, Water research, 43, 4479-4488, 2009.
Q. Manzoor, R. Nadeem, M. Iqbal, R. Saeed, T.M. Ansari,
“Organic acids pretreatment effect on Rosa bourbonia
phyto-biomass”, Bioresource Technology, 132, 446–455,
I.A.A. Hamza, B.S. Martincigh, J.K. Ngila, V.O. Nyamori,
“Adsorption studies of aqueous Pb(II) onto a sugarcane
bagasse/multi-walled carbon nanotube composite”,
Physics and Chemistry of the Earth, 66, 157–166, 2013.
O. Karnitz, L.V. Alves, J.C. Perin de Melo, V.R. Botaro,
T.M. Sacramento, R. Pereira, L.F. Gil, “Adsorption of
heavy metal ion from aqueous single metal solution by
chemically modified sugarcane bagasse”, Bioresource Technology,
, 1291–129, 2007.
Downloads
Issue
Section
License
The authors to publish in this journal agree to the following conditions:
- The authors transfer the copyright and give the the journal first publication right of the work registered with Creative Commons Attribution License, which allows third parties to use the published work on the condition of always mentioning the authorship and first publication in this journal.
- The authors may perform other independent and additional contractual arrangements for the non-exclusive distribution of the version of the article published in this issue (E.g., Inclusion in an institutional repository or publication in a book), it must be indicated clearly that the work was first published in this journal.
- It allows and encourages the authors to publish their work online (eg institutional or personal pages) before and during the review and publication process. It can lead to productive exchanges and greater and faster dissemination of the published work (see The Effect of Open Access)
Instructions to fill out Certificate of Originality and Copyright Assignment
- Click here and get the forms of Certificate of Originality and Copyright Assignment .
- In each field to fill out, click and complete the corresponding information.
- Once the fields are filled out, at the end of the form copy your scanned signature or digital signature. Please adjust the size of the signature on the form.
- Finally, you can save them as pdf files and send them through the OJS platform as an attachment.
