Sistema para el Control de Calidad de Piezas Metalúrgicas a partir de Imágenes 3D
DOI:
https://doi.org/10.15665/rp.v11i1.29Keywords:
Control de calidad, Nube de puntos, Telémetro laser, PCL, ROS.Abstract
En este documento se presenta el diseño y construcción de un prototipo experimental que realiza el dimensionamiento de piezas metalúrgicas a partir de modelos tridimensionales digitalizados, con el fin de adelantar un control de calidad de las mismas. Los datos entregados por el láser 3D utilizado como sensor, son transformados en una nube de puntos por medio de la plataforma ROS (Robotic Operating System) y procesados con la librería PCL (Point Cloud Library). También se muestran los resultados obtenidos al medir una muestra poblacional de cilindros de gas fabricados bajo la norma NTC 522-1 5ta actualización, los cuales fueron proporcionados por la empresa Electrigas de la ciudad de Pereira, Risaralda; notándose que en ningún caso el error en la medición supera el 5%.
References
B. P. Mañana, “Una experiencia en la aplicación del Láser Escáner 3D a los procesos de documentación y análisis del Patrimonio Construido”, DIALNET, no. 5, p. 15-32, Nov., 2008.
L. Alfredo, P. S. Omar, “Aplicaciones de láser escáner 3D trimble-mensi en estudios de accidentes y de criminología (forensics)”, DIALNET, no. 97, p. 70, Nov., 2004. 86. Sistema para el Control de Calidad de Piezas Metalúrgicas a partir de Imágenes 3D}
A. González, “Aplicaciones de la Estereoscopia”. Disponible:
http://www.red3i.es/stereoweb/aplica.htm
M. Barrios, H. Ramírez & P. Bonaveri. Segmentación de Imágenes de Tomografía Computarizada en Pacientes que han Sufrido un Accidente Cerebro Vascular. Revista Prospectiva de la Universidad Autónoma del Caribe, Vol. 9, N° 2, pp. 48-53, Diciembre de 2011.
A. B. Quintanilla, “Aplicación de un escáner 3D a fines didácticos”. Disponible: http://www.cea-fac.es/actividades/jornadas/XXII/documentos/C01D.pdf
Z. Sandoval & F. Prieto. Procesamiento de Imágenes para la Clasificación de Café Cereza. Revista Prospectiva de la Universidad Autónoma del Caribe, Vol. 7, N° 1, pp. 67-75, Julio de 2009.
P. Martínez. Propuesta Metodológica para el Diseño de un Banco de Pruebas para Engranajes Cilíndricos Rectos. Revista Prospectiva de la Universidad Autónoma del Caribe, Vol. 10, N° 2, pp. 64-73, Diciembre de 2012.
C. Cano, “Telémetro láser 3D con sensor Hokuyo UTM- 30lx”, DIALNET, p. 5-13, Feb. 2010.
M. Cely & A, Díaz. Tomografía Computarizada en 3D para Análisis y Diseño de Prótesis Transtibial. Prospectiva. Vol. 7, N° 1, pp. 71-578, Julio de 2009.
C. Díaz & C. Romero. Navegación de Robot Móvil usando Kinect, OpenCV y Arduino. Revista Prospectiva de la Universidad Autónoma del Caribe, Vol. 10, N° 1, pp. 47-52, Julio de 2009.
HOKUYO-AUT, “Datasheet Scanning Laser Range Finder UTM-30LX/LN”. Disponible: http://www.sentekeurope. com/utm-30lx.html
HOKUYO-AUT, “Protocolo de Comunicación SCIP 2.0”. Disponible: http://www.hokuyo-aut.jp/02sensor/ 07scanner/download/data/URGSCIP20.pdf
MICROCHIP, “Data Sheet PIC16F87XA”. Disponible: http://ww1.microchip.com/downloads/en/devicedoc/39582b.pdf
W. Garage, “ROS Documentation”. Disponible: http://www.ros.org
B. P. GERKEY, J. LEIBS, and B. Gassend, “HokuyoNode-ROS”. Disponible: http://ww.ros.org/wiki/hokuyonode
W. Garage, “What is PCL?”. Disponible: http://pointclouds.org/about.html
A. Salazar, S. L. Gonzalo, and F. Prieto, “Sistema de adquisición de imágenes de rango con base en estéreoactivo”, DYNA. no. 153, p. 301-311, Nov. 2007.
P. Trujillo, “Localización de contornos con precisión sub-pixel en imágenes bidimensionales y tridimensionales”. Ph. D. dissertation, Las Palmas de Gran Canaria, Universidad Las Palmas de Gran Canaria, 2004.
J. D. Franca, “A 3D scanning system based on laser triangulation and variable field of view”, “IEEE 3-D Digital Imaging and Modeling”, vol. 1, p. I- 425-8, Sep. 2005.
M. M. Muja, D. G. Lowe, “Fast Approximate Nearest Neighbors with Automatic Algorithm Configuration”, presented at the Proceedings of the International Conference on Computer Vision Theory and Applications (VISAPP), Lisbon, Portugal, February 5-8 2009.
Downloads
Published
Issue
Section
License
The authors to publish in this journal agree to the following conditions:
- The authors transfer the copyright and give the the journal first publication right of the work registered with Creative Commons Attribution License, which allows third parties to use the published work on the condition of always mentioning the authorship and first publication in this journal.
- The authors may perform other independent and additional contractual arrangements for the non-exclusive distribution of the version of the article published in this issue (E.g., Inclusion in an institutional repository or publication in a book), it must be indicated clearly that the work was first published in this journal.
- It allows and encourages the authors to publish their work online (eg institutional or personal pages) before and during the review and publication process. It can lead to productive exchanges and greater and faster dissemination of the published work (see The Effect of Open Access)
Instructions to fill out Certificate of Originality and Copyright Assignment
- Click here and get the forms of Certificate of Originality and Copyright Assignment .
- In each field to fill out, click and complete the corresponding information.
- Once the fields are filled out, at the end of the form copy your scanned signature or digital signature. Please adjust the size of the signature on the form.
- Finally, you can save them as pdf files and send them through the OJS platform as an attachment.
