Conceptual approach to thermal analysis and its main applications/Aproximación conceptual al análisis térmico y sus principales aplicaciones

Authors

DOI:

https://doi.org/10.15665/rp.v15i2.1166

Keywords:

Physical chemistry, Calorimetry, Thermochemistry, Thermal analysis

Abstract

This work shows to the reader a general description about the techniques of classic thermal analysis as known as Differential Scanning Calorimetry (DSC), Differential Thermal Analysis (DTA) and Thermal Gravimetric Analysis. These techniques are very used in science and material technologies (metals, metals alloys, ceramics, glass, polymer, plastic and composites) with the purpose of characterizing precursors, following and control of process, adjustment of operation conditions, thermal treatment and verifying of quality parameters.

References

V.S. Ramachandran, R.M. Paroli, J.J. Beaudoin,

A.H. Delgado, Handbook of thermal analysis of construction

materials. No Wich, New York, Noyes Publications,

William Andrew Publishing, 2002, pp. 1-5, 9-30.

T. Lever, P. Haines, J. Rouquerol, E. Charsley, P. Van

Eckeren, D.J. & Burlett, ICTAC Nomenclature of thermal

analysis Pure Apply Chem, 2014. 86, pp. 545-53.

Warrington, Simultaneous thermal analysis techniques,

in Priciples of Thermal Analysis and Calorimetry

the Royal Society of Chemistry. 1 (P. J. Haines,

Editor), 2002, pp. 100-120.

W. J. Smothers, Handbook of differential thermal

analysis. Rvere (MA): Chemical Publishing Co, 1966,

pp.50-70.

S. Suriñach, M. Baro, D. Bordas, & S. Clavaguera,

“On the Crystallization kinetics of Fe-B Si metalhc

glasses”. Zeitschrift für Physikalische Chemie (Neue

Folge), 157, 395-399, 1988.

M. Juhász, M. Kitahara, S. Takahashi, & T. Fuji,

“Thermal stability of Vitamin C: Thermogravimetric

analysis and use of total ion monitoing chromatograms”,

Journal of Pharmaceutical and Biomedical

Anlisis. 59, 190– 193, 2012.

S. Gladkikh, “Ascorbic acid and methods of increasing

its stability in drugs”. Pharmaceutical Chemistry

Journal, 4 (2), 699–705, 1970.

A.D. Bansod, & A.S. Aswar, “Coordination chain

polymers of Transition metals with salen type schiff

base and their oxidation catalysis”. Journal of Saudi

Chemical Society, 11(2), 243–252, 2007.

Y. S. Shoval, “A study of the mass-gain of ancient

pottery in relation to archeological ages using thermal

analysis”. Applied Clay Science. 82, 1, 113-120, 2013.

M. Baro, S. Suriñach, M. Clavaguera-mora, & N.

Clavaguera, “Glass-to crystalline transformation in rapidly

quenched Fe78B9Si13 feromagnetic alloy”. Journal

of Non-Crystalline Solids, 69,105-115, 1984.

A. Plante, J. Fernández, & J. Leifeld, “Application

of termal analysis techniques in soil science”. Geoderma,

(1–2)1-10, 2009.

R. Auras, B. Harte, S. Selke, & R. Hernandez, “Mechanical,

Physical and barrier properties of poly (lactide)

films”. Journal of Plastic Film & Sheeting, 19(2),

-35, 2003.

PŚ. Śesták, P. Holba, “Hot topics of thermal analysis”.

Journal Thermanal Calorimetry, 114, 459-62, 2013.

T. Ozawa, “Thermal analysis -Review and prospects”.

Thermochimica, 355, 1–2, 35–42, 2000.

JE. Ricci, The phase rule and heterogeneous equilibrium.

ew York: Dover Publications, Inc, 1966. pp.

- 555.

W. J. Smothers, Handbook of differential thermal

analysis. Revere (MA): Chemical Publishing Co, 1966.

pp. 12-20

R. Bottom, Thermogravimetric analysis, in Principles

and aplications of thermal analysis. Blackwell

Publishing Ltd, 2008. pp. 114-132.

G.W.H. Höhne, W.F. Hemminger, H. J. Flammersheim,

Differential Scanning Calorimetry. Berlín (RFA):

Springer–Verlag, 2010. pp. 60-80.

V. LD. Rakić, Temperature programmed desorption

(TPD) methods, in Calorimetry and Thermal

Methods in Catalysis, Berlin (RFA): Springer Verlag,

pp.1-3.

C.J. Keattch, K. Honda-his, Thermobalance and his

achiev ments. Netsu Sokutei Japan, 17, 101-106, 1990.

W.W. Wendland, The automation of thermal

analysis instrmentation: Thermogravimetry and differential

thermal analysis, in Thermal analysis. Switzerland:

Springer Basel A.G., Basel, 1972. pp.1-2.

J. Yang, & C. Roy, Using DTA to quantitatively

determine enthalpy change over a wide temperature

range by the “mass difference baseline method”. Thermochimica,

, 131–140, 1999.

S. Yutaka, H. Hiroshi, & M.K. Masanori, “Differential

termal analysis under high-pressure gas atmospheres:

applications to materials science and engineering.

A review”. Thermochemical, 121, 21–37, 1987.

L. Martínez, M. Videa, & J. Mesquita, “Design,

construction and calibration of a portable multi sample

DTA setup”. Thermochemical, 560, 89–94, 2013.

M. Chekaylo, V. Ukrainets, G. Il’Chuk, Y. Pavlovsky,

& N. Ukrainets, “Differential thermal analysis

of Ag–Ge–Se, Ge–Se charge materials in the process

of their heating and Ag8GeSe6, GeSe2 Compound

synthesis”. Journal of Non-Crystalline Solids, 358(2),

–327, 2012.

KP. Menard, Dynamic mechanical analysis: a

practical introduction. CRC press, 2008. pp.1-11.

G. Parshetti, A. Quek, R. Betha, & R. Balasubramanian,

“TGA–FTIR investigation of co-combustion

characteristics of blends of hydrothermally carbonized

oil palm biomass (EFB) and coal”. Fuel Processing

Technology, 118, 228–234, 2014.

K. Gallagher, Thermogravimetry and Thermomagnetometry.

Handbook of Thermal Analysis and

Calorimetry, 1988. pp.106-120.

K. Honda, “On a Thermo balance”. Science Reports

of theThuku Imperial Universite, 4, 97-103, 1915.

F. Heym, W. Korth, B.J.M. Etzold, C. Kern, & A.

Jess, “Determination of vapor pressure and thermal

decomposition using thermogravimetrical analysis”.

Thermochimical, 622, 9-17, 2015.

C. Keattch, D. Dollimore, “Studies in the history

and development of thermogravimetry”. Journal

of Thermal Analysis and Calorimetry, 39, 97-118, 1993.

B. Wunderlich, “Learning about calorimetry”.

Journal of the mal Analysis and Calorimetry, 49, 7-16,

W. Zielenkiewicz, “Towards classification of calorimeters”.

Journal of Thermal Analysis and Calorimetry,

, 663-71, 2008.

PJ. Haines, Introduction to thermal methods, in

Thermal methods of analysis. Principles, applications

and problems Netherlands, 1995. pp. 279-289.

P. Siitsmanc, V. Oja, “Extensión of the DSC method

to mea Uring vapor pressures of narrow boiling range

oil cuts”. Thermochimica. 622, 31−37, 2015.

C. Rathgeber, L. Miró, L. Cabeza, S. Hiebler, “Measurement

of enthalpy curves of phase change materials

via DSC and T-History: ¿When are both methods

needed to estimate the behaviour of the bulk material

in applications?” Thermochimica, 596, 79–88, 2015.

KV. Kodre, SR. AttardeYendhe, PR. RY. Patil, &

VU. Barge, “Differential Scanning Calorimetry: A Re-

view”. Research and Reviews: Journal of Pharmaceutical

Analysis, 3, 11-12, 2014.

W. Hemminger, Definitions, nomenclature, terms

and literature, in Handbook of thermal analysis and

calorimetry Elsevier Science B. V, 1998. pp. 1-15.

R. Sabbah, A. Xu-Wu, J. Chickos, MP. Leitão, M.

Roux, & L. Torres, “Reference materials for calorimetry

and differential termal Analysis”. Thermochimica,

, 93–204,1999.

Downloads

Additional Files

Published

2017-07-06

Issue

Vol. 15 No. 2 (2017): Julio - Diciembre

Section

Articles

License

The authors to publish in this journal agree to the following conditions:

  1. The authors transfer the copyright and give the the journal first publication right of the work registered with Creative Commons Attribution License, which allows third parties to use the published work on the condition of always mentioning the authorship and first publication in this journal.
  2. The authors may perform other independent and additional contractual arrangements for the non-exclusive distribution of the version of the article published in this issue (E.g., Inclusion in an institutional repository or publication in a book), it must be indicated clearly that the work was first published in this journal.
  3. It allows and encourages the authors to publish their work online (eg institutional or personal pages) before and during the review and publication process. It can lead to productive exchanges and greater and faster dissemination of the published work (see The Effect of Open Access)

Instructions to fill out Certificate of Originality and Copyright Assignment

  1. Click here and get the forms of Certificate of Originality and Copyright Assignment  .
  2. In each field to fill out, click and complete the corresponding information.
  1. Once the fields are filled out, at the end of the form copy your scanned signature or digital signature. Please adjust the size of the signature on the form.
  2. Finally, you can save them as pdf files and send them through the OJS platform as an attachment.